该职位来源于猎聘 Mission As a embedded system engineer for CPI Shanghai R&D team, you will be part of the global headquarter team, and part of a new product & business development that is key to further strengthens Desoutter strong market position. Your mission is to understand our customer assembly processes requirements and propose light automation solutions based on our standard offers starting with screw-feeding projects.You will design and adapt control systems mainly withPCB board.

作为CPI上海研发团队的嵌入式系统工程师，您将成为全球总部团队的一员，参与新产品和业务的开发，这是进一步巩固马头动力强大的市场地位的关键。 您的使命是了解我们客户的装配工艺要求，并根据我们的标准报价，从自动送钉机项目开始，提出嵌入式自动化解决方案。您将主要利用集成式PCB板，设计和优化控制系统（嵌入式开发）；为我们的客户部署解决方案；支持调试和安装，确保客户满意。 Major Responsibilities Duties and responsibilities include, but are not limited to:

• Documenting the customer process and propose light automation solutions based on Desoutter standard products.
• Designing and adapting control systems (Hardware) to match the customer process requirements.
• Documenting the designed solution from circuit board design to single chip programming, set-up configuration, schematic, layout, electronic BOM, and so on.
• Working proactively and closely with Mechanical Engineer, Software engineer, supplier and Lab engineer to ensure the solution complete integration.
• Upload drawings, program, parameter set up into product data management system.
• Strictly follow the safety procedures and instructions during the travel and at the workplaces in company, customers' and business partners' facility, and correctly wear Personal Protective Equipment according to instruction. Actively participate safety training, self-learning and other activities. Report safety risk to prevent accident.
  
  

任务职责包括但不限于：

• 根据客户需求，根据Desoutter标准产品要求提出轻型自动化解决方案。
• 设计并优化自动化产品控制系统（硬件），以满足解决方案和客户工艺需求。
• 从电路板设计、配置设置、原理图、布局、电子物料清单（BOM）等方面，详细记录所设计的解决方案。
• 积极主动地与机械工程师、软件工程师、供应商及实验室工程师密切合作，确保解决方案的完整集成。
• 将图纸、程序、参数设置上传至产品数据管理系统。
• 在公司、客户及合作伙伴场所出差或工作时，严格遵守安全规程和指示，正确佩戴个人防护装备。积极参与安全培训、自学及其他活动，报告安全隐患以防止事故发生。
  
  

Education & Experience：

• Bachelor’s degree in computer, communication, or automation engineering, master’s degree is plus.
• Minimum 3 years’ professional experience in embedded motor controls design and programming.
• Experience in 0-1 innovative product development.
• Experience in industrial/automotive assembly.
  
  

Knowledge & Skills：

• Proficient in PCB layout design, manufacturing process optimization, and troubleshooting (e.g., yield improvement, equipment validation)‌.
• Skilled in circuit design tools for schematic design, simulation, and verification‌.
• Proficient in C/C++ for embedded systems with practical product control case experience‌.
• Familiar with Python for automation scripting and test environment setup‌.
• Mastery of industrial protocols (UART, MODBUS, CANOPEN, RS485, Profi-net, Ether-cat, etc.) for data integration and system adaptation in complex environments‌.
• Deep understanding of servo, brushless, and stepper motor control principles, including sensor signal processing and multi-system debugging‌
• Skilled in using MPLAB IDE and VS CODE.
• Ability to diagnose circuit board issues using oscilloscopes and logic analyzers, followed by hardware debugging and optimization‌.
• Experience in mass production maintenance, including field testing and component variance analysis‌
• Knowledge about software lifecycle and change management.
• Knowledge of Motor Vehicle and/or General Industry segments is a plus.
• Ability to handle multiple projects at one time.
• Analytical problem-solving skills.
• Fluent (spoken & written) in English & Chinese (Mandarin)
  
  

Personality & Behavior Traits：

• Team player, good interaction skills
• Innovative, creative and curious, eager to learn.
• High level of drive and an open-minded personality.
  
  

教育和经验要求：

• 计算机、通信或自动化工程专业本科以上学历，硕士学历优先
• 至少3年或以上嵌入式开发、测试经验，具备良好的编程技巧和技术文档编写能力
• 具有从0到1创新产品的设计和制造经验
• 具有工业/汽车装配经验优先
  
  

知识技能：

• 熟悉PCB布局设计、生产工艺优化及问题排查（如良率提升、设备验证）。
• 熟练使用电路设计工具进行原理图设计、仿真与验证。
• 精通嵌入式系统C/C++语言开发，具有实际产品控制案例经验。
• 精通Python语言，可用于自动化脚本编写及测试环境搭建。
• 熟悉软件测试以及Bug修复。
• 掌握工业通信协议（UART、MODBUS、CANOPEN、Profi-net, Ether cat等），支持复杂场景下的数据集成与系统适配。
• 深入理解无刷电机及步进电机控制原理，熟悉传感器信号处理及多子系统联调, 具备电机控制实际经验优先。
• 熟练使用MPLAB IDE及VS CODE开发工具。
• 能够使用示波器和逻辑分析仪诊断电路板问题，并进行硬件调试与优化。
• 具备量产维护经验，包括现场测试及元器件差异分析。
• 了解软件生命周期及变更管理流程。
• 熟悉汽车行业或通用工业领域者优先。
• 具备多项目并行处理能力。
• 善于分析问题并提出解决方案。
• 中英文（普通话）流利（口语及书面）。精通C/C++，具备底层驱动的调试经验
  
  

性格和行为特质：

• 具有团队合作精神，良好的沟通能力
• 具有创新精神、创造力和好奇心，渴望学习
• 性格开朗，干劲十足